Let's cut to the chase. A candle molds should not bought.Tried an old method with the sand as the mold. Read on and candles for enjoy.Sand are the various forms of all the candles, you can almost every form. Square, round or free-flowing, everything depends on your creativity side.Where we start? Now we need a bit of sand, you center.Next your local beach or garden, we need to get a container. Not plastic, a bit 'like a metal tin or aluminum. Choose a container that does not always dampen the sand before it is rust.

I form. Put in enough water to the color. How much water will stick in their hands, we need this, just a couple of sand.To make your shape with your hands or a piece of wood, glass, etc. Then the sand around your mold.So now add their pack, say , a square shape, with a piece of wood, wax, pour your heated around 275 I 135C. Always use a double burner and thermometer, do not burn wax. Time to see what you are doing the wax, when heated to, walk away.Remember, a little 'smoke is normal during the warm wax and spitting all the water is a good tip is to wax evaporated.

Now in shape with the back of a spoon slowly pour goes and keeps the wax pinched the bottom of the whole form, fill mold.You Growing up here is almost hissing and blowing to see how to beat the wet sand wax. Is normal. Let the wax cool down until you see a pretty thick surface where wax top.The is given the sizes of the drops, because the sand absorbs a good dose of wax.Now when the wax has cooled a bit ', with an ice pick or drill or just a piece of strong wire or nails and bag a wick hole in the center of the wick is candle.

Place, so that the entire surface of the candle, wait sand.Do very difficult as we need to dig out of the mold . Brush and sand as much as it can hurt you with the candle, the sand is darker because dries.You now need a propane torch to start with some interesting curves on your candle.Start that goes from the top of your candle with the flame on the sand, with a sort of brush motion – keep the flame very low.You sand will change the dark. Do not play with the torch to stay in one place too long, to experiment, perhaps by fusing sand and wax to show more growth in different pages, use the creative side.

One what love is a form in sand by hand to dig and shape using a sheet of aluminum (aluminum), which constitute what we want. Pour in the wax around 91C or 195F, and put the wick before allowing a degree of contraction, so it may be necessary to pay more wax if necessary. Let the candle cool, then remove the aluminum foil. How much sand do not use candles and unusual shapes. Keep trying new things with the process of candle.